Filter
Top Products
SPECIFICATIONS
MECHANICAL
Cooling Pipe Connections: Standard 3/8-inch NPT pipe fittings
Suggested Operating
Pressure: 35 psi, approximately 2.3 gallons/minute
Cooling Jacket Volume: Approximately 3 gallons
GENERAL
Construction: Type 304 stainless steel
Finish: Silver-gray paint
Viewing Window
HT10V: .25-inch (6.35 mm) thick Vycor glass
HT10V/RC: .25-inch (6.35 mm) thick Vycor glass with infrared coating
Window
Temperature Range
HT10V: Up to 2500°F (1371°C)
HT10V/RC: Up to 1832°F (1000°C)
Maximum
Camera and Lens Size: Accepts camera and lens combinations (including BNC
connector) up to:
5.50 (H) x 5.00 (W) x 22.00 (L) inches
(13.97 x 12.70 x 55.88 cm) or
8 (D) x 22 (L) inches
(20.32 x 55.88 cm)
Weight
Dry: 50 lb (22.5 kg)
With coolant: 70 lb (31.5 kg) approx.
Rating: NEMA 1 (HT10V)
(Design and product specifications subject to change without notice.)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE IN INCHES.
A
3/8” N.P.T.
WATER INLET AND OUTLET
3/8” N.P.T.
11.50
(29.21)
12.50
(31.75)
WATER INLET
AND OUTLET
25.31
(64.29)
DRAIN
Ø .31 (.79), 6X
7.00
(17.78)
9.12
(23.16)
B
C
I.D.
9.75
(24.76)
.75 (1.9)
5.00 (12.70)
6.25 (15.88)
9.00 (22.86)
A
B
C
BASE
Figure 2. HT10 Series Dimension Drawing