Filter
Top Products
6 C488M-A (10/04)
Technical Specifications
MECHANICAL
Camera Mounting Multiple holes on adjustable camera sled
Maximum Camera and Lens Size Accepts camera and lens combinations* (including BNC connector) up to:
4.50 (H) x 4.50 (W) x 10.375 (L) inches
(11.43 x 11.43 x 26.33 cm)
Viewing Window Area 4.00 (H) x 4.00 (W) inches (10.16 x 10.16 cm)
Cable Entry Two 0.75-inch (1.91 cm) knockout holes on rear of enclosure
Security Two tamper-resistant screws on each access door
Allen wrench supplied)
*Assumes lens is fully extended.
GENERAL
Front Window 0.25-inch (6.35 mm) thick Lexan
®
resin
Construction 0.059-inch (1.49 mm) thick, 16-gauge steel
Finish Gray polyester powder coat
Environment Indoor; 32˚ to 120˚F (0˚ to 49˚C)
Weight 65 lb (2.95 kg)
Shipping Weight 8lb (3.62 kg)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
1.00 (2.54)
12.00
(30.48)
1/4-20 PEM NUT 6X
2.50 (6.35)
1.00 (2.54)
5.00
(12.70)
6.00
(15.24)
3.98 (10.11)
5.00
(12.70)
2.50
(6.35)
1.50
(3.81)
.625
(1.59)
2.50
(6.35)
Ø.75 (1.91)
KNOCKOUT 2X