Filter
Top Products
C1405SM-A (5/06) 7
Maintenance
Perform the following maintenance at regularly scheduled intervals to prolong the operational life and appearance of the equipment.
1. Clean the window with a mild non-abrasive detergent in water and a soft cloth to maintain picture clarity.
2. If your enclosure has a blower, clean the foam filter as follows:
a. On the bottom front of the enclosure, remove the two screws in the vent grill.
b. Remove the vent grill and take out the filter.
c. Clean the filter with warm water and mild detergent, dry thoroughly, and replace it in the grill.
d. Reinstall the vent grill.
To order replacement filters, use the part number EH470010009.
Exploded Assembly Drawings
Figure 1.
EH4700 Exploded Assembly Diagram
17
3
4
1
16
H
15
13
14
G
F
12
10
E
9
8
TO PEM STUDS
IN LID
7
D
I
6
C
2
I
E
5
11
E
D
B
B
F
B
F