Filter
Top Products
16 C478M-M (1/06)
Specifications
Camera Mounting Multiple holes on adjustable camera sled; camera sled mounts in
threaded strip for easier removal and can be inverted for additional
camera elevation
Camera and Lens Size Accommodates camera and lens combinations (including BNC
connector) up to 2.87” W x 3.00” H (7.28 x 7.62 cm) and the following
lengths:
EH3508 6.80” (17.27 cm)
EH3508-1/-2/-3 5.00” (12.70 cm)
EH3512 10.25” (26.03 cm)
EH3512-1/-2/-3 9.00” (22.86 cm)
EH3512-1HD/-2HD/-3HD 10.00” (25.40 cm)
EH3515 13.25” (33.66 cm)
EH3515-1/-2/-3 12.00” (30.48 cm)
EH3515-1HD/-2HD/-3HD 13.00” (33.02 cm)
Viewing Window Lexan
®
, 0.187-inch (4.75 mm) thick, optically clear, impact resistant,
MR5 coated (U.L. 94HB rated)
Viewing Area
EH3508/EH3512/
EH3515 2.25” H x 2.63” W (5.71 x 6.68 cm)
All other models 2.00-inch (5.08 cm) diameter circle
Cable Entry Two PG13.5 compression glands on bottom at rear of enclosure;
0.47-inch (1.19 cm) maximum cable diameter
Cable Entry Holes 0.875-inch diameter; will accept 0.50-inch (1.27 cm) conduit fitting
when compression gland is removed
Latch Link-lock No. 3, stainless steel, can be secured with padlock (not
supplied)
GENERAL
Construction Extruded and die-cast aluminum body
Dimensions Refer to Figure 7
Environment -10° to 120°F (-23° to 49°C)
Weight
EH3508 2.67 lb (1.21 kg)
EH3508-1/-2/-3 2.76 lb (1.25 kg)
EH3512 3.40 lb (1.58 kg)
EH3512-1/-2/-3/
-1HD/-2HD/-3HD 3.85 lb (1.75 kg)
EH3515 4.10 lb (1.86 kg)
EH3515-1/-2/-3/
-1HD/-2HD/-3HD 4.47 lb (2.03 kg)
(Design and product specifications subject to change without notice.)