Filter
Top Products
Pelco Manual C478SM (8/99) 3
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following warnings should be observed.
1. Installation and servicing should only be done by qualified service personnel and
conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P
enclosure, it is designed for indoor use only and it must not be installed where
exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.
5. The installation method and materials should be capable of supporting four times the
weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within this unit.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this unit.
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
The EH3508/EH3512/EH3515 Series are indoor/outdoor light-duty camera enclosures
designed for use with various cameras on the market and accommodate fixed focal length
lenses or motorized zoom lenses, with or without auto-iris operation.
The lid of the enclosure is hinged in the front providing easy access during installation and
when camera/lens adjustments are necessary. The camera sled itself serves as an
elevation block. You can remove, flip, and then reinstall the sled to elevate the camera. All
wiring and cabling is brought into the enclosure through adjustable gland at the bottom rear
of the enclosure.
The rear link-lock latch can be used with a padlock of suitable size for applications requiring
additional security.
The EH3515L Legacy
®
Series enclosures are used with pan/tilt units in Pelco’s PT480
Series. The enclosures are mounted on the bottom. A connector in the pan/tilt unit attaches
the enclosure, mechanically and electrically, to the pan/tilt unit.
MODELS
EH3500 SERIES
EH3508 Enclosure, indoor/outdoor, 8.75-inch (22.23 cm) lower body length. (CE)
EH3508-1 EH3508 with 120 VAC defroster and thermostatically controlled heater;
13 watts
EH3508-2 EH3508 with 24 VAC defroster and thermostatically controlled heater;
13 watts
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.