Filter
Top Products
C2444M-C (1/04) 17
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED AUTO
AGC LIMIT 27
AUTO IRIS AUTO
AUTO IRIS LEVEL 66
AUTO IRIS PEAK 8
AUTO SHARPNESS ON
SHARPNESS LEVEL 26
AUTO WHITE BALANCE ON
R GAIN 482
B GAIN 678
BACKLIGHT COMP OFF
VIDEO LEVEL HIGH
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
<Advanced Camera Settings>
SHUTTER SPEED
Shutter speed is the duration of the electronic shutter. Program shutter speed to operate
automatically (Auto) or manually (Numeric Value).
AUTO (default) - The electronic shutter speed is set automatically by the amount of light
sensed by the camera.
NUMERIC VALUE - Spectra III SE dome system has several numerical shutter speed
settings. The higher the number, the faster the electronic shutter.
The slowest shutter speed setting is 2 = 1/2 second
The fastest setting is 30,000 = 1/30,000 second
Increasing the shutter speed lowers the light sensitivity and reduces
the streaking of fast moving objects.
NOTE: Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz
environment. This will eliminate any flicker that may occur in the picture.
AGC LIMIT
The AGC (automatic gain control) Limit adjusts the brightness of the picture. Settings range from
0 to 40. The brightness increases as the number gets higher.
(See page 9)
Quick Programming Guide
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
TYPE OF LIGHTING OUTDOOR
AUTO FOCUS ON
ZOOM LIMIT X176
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
<ADVANCED SETTINGS>
CAMERA
* This setting only applies to Pressurized
Spectra III SE dome systems with
software version 1.25 or higher.