Filter
Top Products
8 C2404M-A (4/05)
Install the Camera Module
CHECK HEATER JUMPER
The Camclosure is equipped with a heater to defrost the dome. Some installations may not require
this heater. If the unit will never be subjected to a frost temperature, you can disable the heater,
saving power. To disable the heater, remove the jumper cover from the heater jumper block. It is
recommended that the jumper cover be left in the unit by installing it on one of the jumper pins.
HEATER JUMPER
CAMERA CONNECTOR
C2404M-A.book Page 8 Monday, April 18, 2005 9:11 AM