Filter
Top Products
C2400M-B (1/06) 3
Description
Heater and defroster kits in the HD35/HD3515 Series are designed for enclosures in the EH3500
Series and EH3515L Legacy
®
Series. The HD35 heater and defroster kit is designed for enclosures
only in the EH3508 Series and EH3512 Series. The HD3515 heater and defroster kit is designed for
enclosures only in the EH3515 Series and EH3515L Legacy Series.
These kits contain a thermostatically controlled heater and a continuous-duty defroster. The heater
turns on when the temperature drops to 50°F (10°C) and turns off when the temperature reaches 80°F
(27°C).
The heater and defroster are attached to a bracket that replaces the window brackets currently used
to hold the viewing window in place. Because of this bracket, the viewing window size is reduced to
a two-inch (5.08 cm) diameter circle.
The HD3515 heater and defroster kit contains two heaters. You install one heater in the front of the
enclosure and the other heater in the rear of the enclosure. The rear heater is attached to a rear heater
bracket, and the rear heater bracket attaches to the rear of the enclosure. If you are also installing a
blower kit, you install the rear heater bracket between the blower and rear of the enclosure.
MODELS
HD35-1 Heater and defroster kit for EH3508 and EH3512 enclosures; 120 VAC; 25 watts
HD35-2 Heater and defroster kit for EH3508 and EH3512 enclosures; 24 VAC; 20 watts
HD35-3 Heater and defroster kit for EH3508 and EH3512 enclosures; 230 VAC; 43 watts
HD3515-1 Heater and defroster kit for EH3515 and EH3515L enclosures; 120 VAC; 25 watts
HD3515-2 Heater and defroster kit for EH3515 and EH3515L enclosures; 24 VAC; 20 watts
HD3515-3 Heater and defroster kit for EH3515 and EH3515L enclosures; 230 VAC; 43 watts