Pelco C1666M-A (4/06) Home Security System User Manual


 
6 C1666M-A (4/06)
PARTS OF THE RECEIVER
Figure 1. TW3001AR Parts
Rubber Feet (4): For placing unit on a flat surface, such as a desk or shelf.
Status LED: Lights red when there is no UTP video being received. Lights green when there is
UTP video being received. Flashes amber when Coaxitron pan/tilt/zoom (PTZ) control commands
are being received.
Pelco Badge: Lights blue to indicate power when using either the 4-pin rack power connector
or the 2-pin power connector.
Rack Power Connector: 4-pin, power from RK5000PS-3U.
Power Connector (3.5 mm): 2-pin; stand-alone power, 12 VDC or 24 VAC.
UTP Connector (2.5 mm): 2-pin connector with removable mating connector.
BNC Connector: Coaxial output.
DIP Switch: Override the adaptive technology with the manual selection of cable distance
(1,000 to 4,000 feet or 305 to 1,219 meters). Switch 5 is used for selecting high mode or low
mode.
+
-
MODEL
SN
FREQ
W
1
23
45
THISDEVICE
COMPLIES
WITH
PART15OFTHE
FCCRULES.
OPERATION
ISSUBJECT
TOTHE
FOLLOWINGT
WO
CONDITIONS:
(1)
THISDEVICEMA
YNOTCAUSE
HARMFUL
INTERFERENCE,
AND
(2)THISDEVICE
MUST
ACCEPT
ANY
INTERFERENCE
RECEIVED,
INCLUSING
INTERFERENCE
THA
TM
AYCAUSEUNDESIRED
OPERA
TION.