Pelco C1420M-H Home Security System User Manual


 
C1420M-H (1/07) 3
Important Safety Instructions
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not
be installed where exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify
the exposed parts have not been connected to line circuitry.
5. The installation method and materials should be capable of supporting four times the weight of the enclosure, pan and tilt, camera and lens
combination.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.
Description
The EH8106L is a sealed and pressurized camera enclosure designed for use with PT780 Series Legacy
®
pan and tilts. The enclosure has lens
preset capabilities and is designed for cameras with fixed focal length or motorized zoom lenses. Two 40-watt heaters are also standard with the
enclosure.
The EH8106L makes use of the Legacy Series system of integral CCTV components. Legacy components make the installation of the pan and tilt
and enclosure fast and easy. The RediLINK
®
connector is a feature that attaches the enclosure mechanically and electrically to the pan and tilt in
one easy step.
This symbol indicates that dangerous voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.