Panasonic HQ-2101SH Air Conditioner User Manual


 
Please observe these following safety precautions when using
your air conditioner.
Failure or negligence in observing these safety precautions
could cause fire, electrical shock or personal injury.
This symbol (with a white background) denotes
an action that is PROHIBITED.
1
SAFETY PRECAUTIONS
These symbols (with a blue background) denote
actions that are COMPULSORY.
INSTALLATION PRECAUTIONS
OPERATION PRECAUTIONS
This sign warns of risk of death or serious injury.
• Do not modify the length of the power cord or use an
extension cord.
Do not touch or operate with wet hands. Do not modify
or damage the cord.
Do not turn on the unit by inserting the power plug. Do
not switch off the unit by pulling out the power plug.
Avoid an extended period of direct airflow.
Do not insert sticks, fingers or other objects into the unit.
Do not try to repair the unit yourself.
Plug in properly before operating and use a specified
power cord.
If abnormal conditions (burnt smell, etc) occur, switch off
and remove the power plug.
WARNING
Do not use the unit for other purposes, than its intended
use.
Do not remove the power plug by pulling the cord.
Do not block the air intake and outlet vanes.
Do not splash or direct water at the unit.
Do not expose the unit to direct sunlight during operation.
Do not operate the unit without the air filter installed or
when the front intake grille has been removed.
Do not place any objects on the unit.
Do not operate any combustion equipment near the unit’s
airflow area.
Switch off the breaker and remove the power plug from
the socket if the unit will not be operated for a long period.
Pay attention to any damages on the unit caused by
extensive usage.
Ventilate the room occasionally where the unit is installed.
Remove the power plug when cleaning the unit.
CAUTION
2
AIR CONDITIONER INSTALLATION
• Due to the weight of this product, we recommend that
you have a helper to assist in the installation. To avoid
injury, use the proper method of lifting. Avoid any sharp
edges.
• Make sure the window frame to be used can properly
support this product.
• This product must be installed in accordance with all local
codes and ordinances.
Do not install the unit in places where inflammable gas,
fumes or soot may be generated.
POWER SUPPLY
• Operate your air conditioner from a stable 115 volt AC
supply.
Plug into a separate 15 amp grounded outlet only.
Use of extension cords
Avoid using extension cords. If there are no alternatives,
ensure that the cord is a UL listed 3-wire grounding type,
rated 125 volts with a minimum current-carrying rating of
15 amps, number 14 or heavier wire.
Use a 15 amp time delay fuse or a circuit breaker.
Do not switch off by unplugging the power plug while it is
operating. Press the OFF/ON pad to “OFF” before
unplugging.
This sign warns of injury or damage to property.
OPERATION PRECAUTIONS
Time Delay Fuse : 15 Amps
Rated Voltage : 115V
• Socket Type
• Line Cord Plug
INSTALLATION BOX CONTENTS
Sealer 50 g
(1.8 oz) (Putty)
Type A
screw
Window sash
sealing ribbon
Type B
screws
Left side expandable panel
Type A
screws
Type A
screws
Top
angle
Window sash
foam seal
Right side
expandable
panel
Type C
screws
SCREW FURNISHED
SUGGESTED TOOL LIST
Medium sized
screwdriver (#2
Phillips)
Tape Measure
Pencil
Level
Knife or
Scissor
Type A screw
Type A Type B Type C
(Qty 6) (Qty 5) (Qty 6)
Wood Machine Tapping
Screw Screw Screw
Top sealing
ribbon
Side
sealing
ribbon