Filter
Top Products
- 11 -
FEATURE CHART
Power On
Power Demand Headlight Cord Length Bare Floor
120V AC(60Hz) Yes Yes 30 Ft Yes
Tableau des caractéristiques
Alimentation Puissance sur Dispositif Longueur du Position
demande d’éclairage cordon plancher
120 V c.a. (60 Hz) Oui Oui 9,1 m (30 pi) Oui
DDiiaaggrraammaa ddee ccaarraacctteerrííssttiiccaass
VVoollttaajjee PPooddeerr eenn LLuuzz EExxtteennssiióónn UUssoo ssiinn
DDeemmaannddaa ddee ccoorrddóónn aallffoommbbrraa
120 V c.a. (60 Hz)
Si Si 9,1 m (30pi) Si
- 54 -
Dust Bin
Release Latch
Dust Bin
Exhaust Filter
Headlight
Nozzle
Loquet de
dégagement
du bac à
poussière
Récipient de
poussière
Filtre d’évacuation
(l’intérieur)
Dispositif d’éclairage
Suceur
Cubodela
basura
Filtro de escape
(dentro)
Luz
Boquilla
Dust bin
release latch
Touch Control
Dirt Sensor
Commandes
Pulsador
de control
Indicador de polvo
Détecteur de
poussière
Crevice Tool
Dusting Brush
Floor Brush
Carpet/Bare Floor
Selector
Body Release
Pedal
Suceur plat
Brosse à
épousseter
Brosse à plancher
Sélecteur
tapis/plancher
Pédale de réglage
de l’inclinaison du
manche
Herramienta
para tapices
Cepillo para
sacudir
Cepillo para
pisos
Control para
alfombra/
sin alfombra
Pedal de liberación
del mango
Adjustable Handle
Manche
Mango a
ajustable
justable
Dust Bin
Lid Release
Bac à poussière
Cubo de basura,
liberación
Removing Clogs
Secondary Filter
Screen
Filtre secodaire
Malia secundaria
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢➢
Check the hose area.
➢➢
Remove extension hose by grasping
the hose collar, twisting, and pulling
straight off.
➢➢
Visually inspect the hose and the
base area into which the hose is
connected.
➢➢
Remove any visible clog.
➢➢
Re-connect the extension hose to the
dust bin port assembly.
➢➢
Plug in the vacuum cleaner and turn it
on.
➢➢
Stretch the hose to maximum length
and then allow the hose to return to its
storage length.
➢➢
Turn off and unplug the vacuum
cleaner.
➢➢
Remove dust bin and check
secondary filter screen for clogs.
➢➢
If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢➢
Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.