Filter
Top Products
- 36 -
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢➢
Unplug vacuum.
➢➢
Press two tabs and pull open suction
inlet and check for clogging.
➢➢
Disconnect hose from short hose and
check the hose for clogging.
➢➢
Plug in vacuum cleaner and turn on.
➢➢
Stretch hose in and out to remove
clog.
➢➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG PO
WER
CORD.
➢➢
Remove lower plate.
➢➢
Remove short hose from nozzle by
lifting straight up.
➢➢
Inspect hose end and clear any
obstructions.
➢➢
Reinstall short hose.
➢➢
Reinstall lower plate.