- 11 -
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢➢
Unplug vacuum.
➢➢
Pull open suction inlet cover and
check for clogging.
➢➢
Remove lower plate.
➢➢
Remove hose from nozzle by lifting
straight up.
➢➢
Inspect hose end and clear any
obstructions.
➢➢
Reinstall hose and lower plate.
Hose
Manguera
Tuyau
Cover
(Suction Inlet)
Couvercle
(de l’entrée
d'aspiration)
Cubierta
(Abertura de
aspiracón)
+
Hose
Manguera
Tuyau
Removing Clogs
Voltaje
Protector termal
Extensión de cordón
Herramientas
9.1 A / 9,1 A
Si 9,1 m (30 pi) Opcional
Power Thermal Protector Cord Length Tools
120V AC (60Hz)
Yes 9.1 m (30 Ft.) Optional
Alimentation
Protecteur thermique
Longueur du cordon Accessoires
120 V c.a. (60Hz)
Oui 9,1 m (30 pi) Optionnels
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
- 34 -