Filter
Top Products
- 50-
Vacuum Cleaner 1. Unplugged at wall outlet. 1. Plug in firmly, push on/off
won’t run. switch to on.
2. Tripped circuit breaker/blown 2. Reset circuit breaker or
fuse. replace fuse at household
service panel.
3. On/off switch not turned on. 3. Push on/off switch to on.
Poor job of dirt 1. Full or clogged dust bin. 1. Empty dust bin.
pick-up. 2. Worn agitator. 2. Replace agitator.
3. Clogged nozzle or dust bin. 3. Check REMOVING CLOGS.
4. Clogged hose. 4. Check for clogs.
5. Hole in hose. 5. Replace hose.
6. Broken/misplaced belt. 6. Replace/fix belt.
7. Hose not inserted fully. 7. Insert hose fully.
8. Motor protection system 8. Check for clogs.
activated.
9. Dirty filters. 9. Change/clean filters.
Agitator not turning 1. Broken belt. 1. Replace belt.
2. Belt installed incorrectly. 2. Check BELT CHANGING
AND AGITATOR CLEANING.
Air flow restricted 1. Tool use restricts air flow. 1. Check TOOLS.
with attachment use. 2. New carpet fuzz clogged 2. Check CLOG REMOVAL and
Sound changes. air path. clean hose.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
BEFORE REQUESTING SERVICE
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service needed, other than those described in these Operating Instructions,
should be performed by an authorized service representative.
WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.