Filter
Top Products
- 11 -- 34 -
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢➢
Unplug vacuum cleaner.
➢➢
Pull open suction inlet cover and
check for clogging.
➢➢
Remove lower plate.
➢➢
Remove hose from nozzle by lifting
straight up.
➢➢
Inspect hose end and clear any
obstructions.
➢➢
Reinstall hose and lower plate.
Cover
(Suction Inlet)
Couvercle
(entrée
d'aspiration)
Cubierta
(Abertura de
aspiracón)
Hose
Manguera
Tuyau
+
Hose
Manguera
Tuyau
Removing Clogs
VVoollttaajjee PPrrootteeccttoorr ddee mmoottoorr
EExxtteennssiióónn ddee ccoorrddóónn
HHeerrrraammiieennttaass
120V c.a. (60Hz)
Si 7.6 m (25 pi) Opcional
Power Motor Protector Cord Length Tools
120V AC(60Hz)
Yes 7.6 m (25 Ft.) Optional
Alimentation Protecteur du moteur Longueur du cordon Accessoires
120V c.a. (60Hz)
Oui 7.6 m (25 pi) Optionnels
FEATURE CHART
DDiiaaggrraammaa ddee ccaarraacctteerrííssttiiccaass
Tableau des caractéristiques