Filter
Top Products
- 21 -
Removing and Installing Lower Plate
➢➢
Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢➢
Place paper under nozzle anytime
lower plate is removed to protect
floor.
➢➢
Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
➢➢
Release lower plate by removing
three (3) screws.
➢➢
Remove lower plate and remove any
residue that may exist in belt area.
➢➢
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
➢➢
Make sure all wires are routed
properly and not pinched.
➢➢
Press lower plate into place then
replace three (3) screws.
Three Screws
Tres tornillos
Trois vis
Lower Plate
Plaque inférieure
Base inferior
- 28 -
WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Ajustes del mango
➢ Pise en el pedal de liberación del
mango para cambiar la posición del
mango.
➢ Avec le pied, appuyer sur la pédale
pour mettre le boîtier à la position
désirée.
Réglage de l’inclinaison du boîtier
➢ Mueva la aspiradora a la posición
vertical para el almacenaje y el uso de
las herramientas.
➢ Mueva la aspiradora a la posición
mediana para el uso normal.
➢ La posición baja para limpiar debajo de
los muebles.
➢ La position à plat s’utilise pour le
nettoyage sous les meubles.
➢ La position à l’angle s’utilise pour le
nettoyage normal.
➢ Sélectionner la position verticale lors de
l’utilisation des accessoires ou le
rangement de l’aspirateur.