Filter
Top Products
- 26 -
- 19 -
WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Removing and Installing Lower Plate
➢➢
Before servicing any part
s,
disconnect vacuum cleaner from
electrical outlet.
➢➢
Place paper under nozzle anytime
lower plate is removed to protect
floor.
➢➢
Place handle in down position and
turn vacuum cleaner over to expose
lower plate.
➢➢
Release lower plate by presing two
(2) latches inward.
➢➢
Remove lower plate and remove any
residue that may exist in belt area.
➢➢
Reinstall lower plate by hooking
front end of lower plate into slots on
front of nozzle housing.
➢➢
Make sure all wires are routed
properly and not pinched.
➢➢
Press lower plate into place then
replace three (3) screws.
Latches
Loquets
Lengüetas
Lower Plate
Plaque inférieure
Base inferior
Ajustes del mango
➢ Pise en el pedal de liberación del
mango para cambiar la posición del
mango.
➢ Avec le pied, appuyer sur la pédale de
réglage de l’inclinasion du boîtier pour
mettre le boîtier à la position désirée.
Réglage de l’inclinaison du manche
➢ Mueva la aspiradora a la posición
vertical para el almacensje y el uso de
las herramientas.
➢ Mueva la aspiradora a la posición
mediana para el uso normal.
➢ La posición baja para limpiar debajo de
los muebles.
➢ La position à plat s’utilise pour le
nettoyage sous les meubles.
➢ La position à l’angle s’utilise pour le
nettoyage normal.
➢ Sélectionner la position verticale lors de
l’utilisation des accessoires ou le
rangement de l’aspirateur.