Filter
Top Products
Trouble Shooting
Please check the following first if you have any problems.
Problem Solution
The appliance does
not switch on.
Check if the plug is connected firmly and the socket outlet is -
working normally.
If a thermal cut-out device has activated, wait approximately 60 -
minutes until it has reset.
The mains lead does
not come out.
Rewind and pull out the mains lead repeatedly while pressing -
the cord rewind pedal without using excessive power.
The mains lead does
not fully rewind.
Pull the mains lead out 2 m to 3 m and then press the cord -
rewind pedal to rewind the mains lead while holding the plug.
Suction power has
decreased.
Check if the dust bag is full (see page - 3).
Check for blockages in hose, telescopic wand, nozzles, and pre-
-
motor filter. Then clean those parts as necessary (see page
4
).
If the problem cannot be solved, please contact your local customer service centre. The
contacts can be found in “GUARANTEE”, the separate paper which has been attached with
the appliance.
Specifications
Specifications MC-CG712 MC-CG710
Power source 230 - 240 V, 50Hz
Max. input 1400 W 1300 W
Nominal input 1100 - 1200 W 1050 - 1150 W
Dimensions (W x L x H) 320 mm x 500 mm x 265 mm
Net weight 5.5 kg
Extension wands Telescopic
Floor nozzle √
Parquet nozzle √ –
Crevice nozzle √
Upholstery nozzle √
Dusting brush √ –
Detachable dusting brush √ –
* Class with respect to protection against electric shock:
7
CG710_EN_UK.indd 9 2012/01/11 10:24:22