Panasonic HQ-2051RH Air Conditioner User Manual


 
FAN
HIGH
LOW LOW
HIGH
COOLOFF
HIGH
FAN
LOW
FAN
HIGH
COOL
LOW
COOL
OFF
1
2
3
4
5
6
7
8
9
10
THERMOSTAT
C
O
O
L
E
R
1
2
3
4
5
6
7
8
9
10
TEMP CONTROL
C
O
O
L
E
R
About the Controls on the Air Conditioner
5
About the Controls on the Air Conditioner
The controls will look like one of the following:
Controls
Off - Turns air conditioner off.
High Fan - High speed fan operation without cooling.
Low Fan - Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation.
Low Cool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow points to the larger marks for
greater cooling.
Point the arrow to the smaller marks for more moderate
cooling.
(i.e. the higher the number, the greater the cooling)
FOR NORMAL COOLING
1. Turn the operation switch to the High Cool or the Low Cool setting.
2. Set the thermostat control to the desired temperature mark (the mid-point is a good
starting position). If the room temperature is not satisfactory after a reasonable time,
adjust the control to a cooler or warmer setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turn the operation switch to the High Cool setting.
2. Set the thermostat control to the largest temperature mark.
• FOR QUIETER OPERATION
1. Turn the operation switch to the Low Cool setting.
2. Set the thermostat control as needed.
• CAUTION
When the air conditioner has performed its cooling operation and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
10
5