Manual Operation
up
down
knead
tap
roll
intensity
down
up
stroke
24in.
4in.
width
narrow
wide
12
MANUAL MASSAGE
First read and familiarize yourself with the safety and operating precautions.
Kneading massage (upward & downward)
Press the button for the desired massage.
• The currently operating massage is indicated by the massage
indicator lamps.
• It is possible to combine different massage types.
Kneading (upward/downward) massage
Tapping massage
Rolling massage
NOTE:
• Do not massage any one point for more than 5 minutes.
• Do not stretch the back muscles for more than approximately
15 minutes at one time. A continuous massage in the same
area may result in soreness.
1. Press the “knead” button. Each time you press the knead button, the kneading direction alternates
between upward and downward.
2. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
3. To adjust the intensity of massage, press the “intensity” buttons.
Tapping massage
1. Press the “tap” button.
The massage heads move to the narrowest position and start the tapping massage.
2. Press the “width” adjustment button to select the width of the massage heads (narrow or wide).
3. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
4. To adjust the intensity of massage, press the “intensity” buttons.
Rolling massage
1. Press the “roll” button.
The massage heads move to the narrowest position and start the rolling massage.
2. Press the “width” adjustment button to select the width of the massage heads (narrow or wide).
3. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
• All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the “stroke” adjustment button.
4. To adjust the intensity of massage, press the “intensity” buttons.