Filter
Top Products
10
Features and Installation
Installation
27" to 39"
(68.6~99.1cm)
Offset
1
/2" to 1
1
/4"
(12.7~31.8mm)
Sill
Exterior
Interior wall
23
5
/
8
" min.(60cm)
(Without frame curtain)
Stool
16" min (40.6cm)
(With frame curtain)
About
1
/
2
"(12.7mm)
30"~60"
(76.2~152.4cm)
Awning
Cooled air
Fence
Over 20"(50.8cm)
Heat
radiation
1. To prevent vibration and noise, make sure
the unit is installed securely and firmly
2. Install the unit where the sunlight does not
shine directly on the unit.
3. The outside of the cabinet must extend
outward for at least 12" (30.5cm) and there
should be no obstacles, such as a fence or
wall, within 20" (50.8cm) from the back of
the cabinet because it will prevent heat
radiation of the condenser.
Restriction of outside air will greatly reduce
the cooling efficiency of the air conditioner.
CAUTION: All side louvers of the cabinet must remain exposed to the outside of the
structure.
4. Install the unit a little slanted so the back is slightly lower than the front
(about
1
/
2"(12.7mm)).
This will force condensed water to flow to the outside.
5. Install the unit with the bottom about 30"~60"(76.2~152.4cm) above the floor level.
Window Requirements
NOTE: All supporting parts should be secured to firm wood, masonry, or metal.
This unit is designed for installation in standard
double hung windows with actual opening widths
from 27" to 39" (68.6~99.1cm).
The top and bottom window sash must open
sufficiently to allow a clear vertical opening of
16" (40.6cm) from the bottom of the upper sash
to the window stool.
How to Install the Unit