Filter
Top Products
8.3.1. Installation Procedures
•
Remove the screws from the rear cabinet.
•
Slide the chassis out from the cabinet.
• Place cabinet into the installation hole.
8 Installation Instructions
8.1. Choosing the Installation Location
•
When installing, use the nearest power outlet. Make sure the power outlet is easy to reach so you can quickly disconnect your
air conditioner in case of emergency.
•
Ensure that the air conditioner is well supported, securely fastened, easily reachable and not obstructed.
•
Avoid locations with: salty or sulphurous air, draughts, dampness and flammable gas.
•
If you install the drainage system, be sure to channel the condensed water to a suitable location
•
Covers, obstructions and unsteady support may cause excessive operating noise and vibration.
•
The rear end of the air conditioner is splash proof. You need not shield or cover it.
8.2. Preparation for Installation
DIMENSION
•
There should not be any obstacles surrounding the unit.
•
Prepare an installation hole slightly bigger than the cabinet size.
•
Left and right sides of the unit should be at least 15cm away from the wall
8.3. Installation Procedure
10
CW-A121VR