Panasonic CU-XE9EKE Air Conditioner User Manual


 
7
ENGLISH
AUTO FILTER CLEANING
Auto F
ilter Cl
eaning
AUTO
AUTO
Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned
off using remote control).
After the filter cleaning is completed, the air conditioner operation will remain off.
AIR CONDITIONER TIMER
AIR CONDITIONER TIMER
Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned
off by the air conditioner timer).
After the filter cleaning is completed, the air conditioner operation will remain off.
Filter Cleaning Indicator
FORCE CLEANING
FORCE CLEANING
Once the air conditioner operation time exceeds 24 hours, the unit is forced to run filter cleaning.
After the filter cleaning is completed, the air conditioner operation will resume automatically.
• The lter cleaning indicator light
will move to left or right when lter
cleaning is in progress.
Filter cleaning in progress will be
cancelled if:
- Certain button on the remote
control are pressed.
- The air conditioner main unit’s
movable front panel is lifted up.
- There is a power failure.
Troubleshooting
Timer indicator is blinking and error code H51 is
revealed on the display.
The lter cleaning device is jammed because the lter is not installed
correctly.
The lter cleaning device is malfunction.
Timer indicator is blinking and error code H52 is
revealed on the display.
The lter cleaning device is malfunction.
Printed circuit board is malfunction.
Note :
To reveal the error code, please refer to Product Overview’s troubleshooting-error code checking.
The condition above does not affect the unit’s operation.
In case of malfunction, please consult your nearest authorized dealer.
About
Filter cleaning