4
• The unit will automatically select the
operation mode according to the
room temperature.
• Once the operation mode is
selected, the unit will operate at the
standard setting temperature as
shown:
Room
temperature
Operation
mode
Standard
setting
temperature
23°C & above Cool 25°C
Below 23°C Dry 22°C
Below 20°C Heat 21°C
• You may press or button
to change the standard setting
temperature to “HI” or “LO” as
shown:
Operation mode HI LO
Cool 27°C 23°C
Dry 24°C 20°C
Heat 23°C 19°C
■ Operation Details
• Enables you to enjoy the cooling
effect at your preferred setting
temperature.
• The range of temperature can be
selected from 16°C ~ 30°C.
• Enables you to set the desired
temperature at low fan speed which
provides you with the dehumidifying
surroundings.
• The range of temperature can be
selected from 16°C ~ 30°C.
AUTO - Automatic Operation
COOL - Cooling Operation
DRY - Soft Dry Operation
● Supersonic air purifying device (super alleru-buster) operates
automatically while the air conditioner is switched on.
● Powerful, Quiet and Ion operations could be activated in all
operation modes.
● Press
OFF/ON
button again to stop the operation.
● To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.
Hint
• Enables you to enjoy the warming
effect at your preferred setting
temperature.
• The range of temperature can be
selected from 16°C ~ 30°C.
HEAT - Heating Operation
● The room has a peculiar odour.
➤ This may be a damp smell emitted by the wall, carpet, furniture or
clothing in the room.
● Air conditioner does not cool or heat effi ciently.
➤ Ensure the temperature has been set correctly.
➤ Ensure windows and doors have been closed properly.
➤ Ensure fi lters are cleaned or replaced when necessary.
➤ Ensure inlet and outlet vents of the units have not been obstructed.
● In heating operation, power indicator blinking and no
warm air discharge.
➤ Defrost operation at outdoor unit, maximum 12 minutes.
Troubleshooting
Auto, Heat, Cool, Dry
Auto, Heat, Cool, Dry
HOW TO OPERATE
TEMP
MODE
POWERFUL
AIR SWING
FAN SPEED
QUIET
1
23
TIMER
ON
OFF
CANCEL
SET
COOL
AUTO
AUTO
AUTO
RESET CLOCK
OFF/ON
2
2
Select the
desired
operation.
3
3
Set the
temperature.
Start the
operation.
1
1
AUTO
COOL
HEATDRY