Panasonic CU-KS18NKUA Air Conditioner User Manual


 
6
UNIT DISPLAY AND OPERATION BUTTON
REMOTE CONTROL receiver This section picks up infrared signals from the remote controller (transmitter).
OPERATION button When the remote controller cannot be used, pressing this button enables cooling
operation.
Each time this button is pressed, the operation mode changes cyclically.
OPERATION lamp This lamp lights when the system is in the continuous DRY (orange), COOL
(green) and FAN (green) mode.
TIMER lamp This lamp lights when the system is being controlled by the timer.
QUIET lamp This lamp lights during operation in the QUIET mode.
The unit’s display lamps are dimmed during operation in the NIGHT SETBACK
mode.
QUIET
REMOTE CONTROL receiver
Avoid using radio equipment
such as mobile phone near
(within 4 ft (1.2m).) the remote
control receiver. Some radio
equipment may cause
malfunction of the unit.
If the trouble happens,
disconnect power and restart
the air conditioner after a few
minutes.
IMPORTANT
OPERATION lamp
TIMER lamp
QUIET lamp
OPERATION button
INDOOR UNIT
Cooling operation Stop
NOTE