Filter
Top Products
5
TO SET THE TIMER
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
OFF
1
2
S
ET
Select ON or
OFF timer
Set the time Confi rm
• To cancel ON or OFF timer, press
O
N
or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET
.
6
7
TO MONITOR HUMAN
PRESENCE & ACTIVITY
FOR ENERGY SAVING &
COMFORT
ECONAVI/
AUTO COMFORT
ECONAVI
To optimize energy saving
AUTO
COMFORT
To maximize comfort
Heat Source & Movement
Normal
HighLow
None
Set Fan Speed
≤ Medium
Fan
+1 tap*
+2°C
-1°C
+1°C
+1 tap
COOL/DRY Mode
Set Temperature
* For first 15 minutes or until set temperature is reached.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is infl uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
8
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
9
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F
10
Press to restore the remote control’s default setting.
11
Not used in normal operations.
NOTES
NOTES
AUT
O
COMFORT
,
E
CO
NAV
I
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
• Cannot be selected at the same time.