Panasonic CU-E28JKR Air Conditioner User Manual


 
4
1
2
3
TIMER
TEMP
SET CHECK CLOCK RESET
RCAC
MODE
OFF ON/
MODE
SETON
CANCEL
OFF
AIR SWING
MILD DRY
ECONOMY
QUIET/ POWERFUL
PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Remote control
display
TO TURN ON OR OFF THE UNIT
Please be aware of the OFF indication on the remote control
display to prevent the unit from starting / stopping improperly.
TO SET TEMPERATURE
• Selection range: 16˚C ~ 30˚C.
Operating the unit within the recommended temperature could
induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During
operation mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
Unit takes a while to warm up. The power indicator blinks during
this operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
Unit operates at low fan speed to give a gentle cooling operation.
Front panel
Receiver
e-ion AIR PURIFYING SYSTEM
Do not touch during operation
e-ion lters e-ion charging wire
Active e-ion Generator
Air ow direction
louver
Do not adjust
by hand.
Maximum distances: 8m
INDICATOR
(Blue)
(Green)
(Orange)
(Orange)
(Orange)
(Green)
(Blue)
Auto OFF/ON button
Used when remote control is misplaced or
malfunction.
Action Mode
Press once. Auto
Press and hold until 1 beep is
heard, then release.
Cooling
Press and hold until 1 beep is
heard, then release.
Press again until 2 beeps, then
release.
Heating
Press the button to turn off.
POWE
R
F566901-OYTK0903-00.indd 4F566901-OYTK0903-00.indd 4 5/5/2009 2:48:43 PM5/5/2009 2:48:43 PM