Panasonic CS-MKE12NKU Air Conditioner User Manual


 
For Indoor Unit
This air conditioner uses the refrigerant R410A.
External diameter of service port R410A: 5/16"
Split System Air Conditioner
85264190583000 2011
INSTALLATION INSTRUCTIONS
NOTE
CV6233187860
Contents
Page
IMPORTANT!
Please Read Before Starting .................................. 2
1. GENERAL .......................................................... 4
1-1. Tools Required for Installation (not supplied)
1-2. Accessories Supplied with Unit
1-3. Optional Copper Tubing Kit
1-4. Type of Copper Tube and Insulation Material
1-5. Additional Materials Required for Installation
2. INSTALLATION SITE SELECTION ................... 5
2-1. Indoor Unit
2-2. Embedding the Tubing and Wiring
3. HOW TO INSTALL THE INDOOR UNIT ............. 7
3-1. Remove the Rear Panel from the Unit
3-2. Make a Hole
3-3. Install the Rear Panel on the Wall
3-4. Removing and Installing the Grille
3-5. Shape the Indoor Side Tubing
3-6. Wiring Instructions
3-7. Wiring Instructions for Inter-unit Connections
3-8. Mounting
3-9. Drain Hose
4. HOW TO TEST RUN THE AIR CONDITIONER ... 17
5. REMOTE CONTROLLER INSTALLATION
POSITION ......................................................... 18
5-1. Mounting on a Wall
6. ADDRESS SWITCH.......................................... 19
6-1. Address Setting of the Remote Controller
7. CONNECTING A HOME AUTOMATION
DEVICE.............................................................. 20
8. INSTALLATION CHECK SHEET ...................... 20
Model Combinations
Combine indoor and outdoor units only as listed
below.
Model No.
Indoor Unit Outdoor Unit
CS-MKE7NKU CU-3KE19NBU
CS-MKE9NKU CU-4KE24NBU
CS-MKE12NKU CU-4KE31NBU
CS-MKE18NKU
CS-MKE24NKU
Power Source:
60 Hz, single-phase, 230 / 208 VAC