Panasonic CS-MC12DKU Air Conditioner User Manual


 
6
ECONOMY
HOW TO OPERATE
Timer
Operation Details
Use the ON timer to turn on the air
conditioner at the desired time. This
will give you a cooled environment, e.g.
when you return from work or wake up.
When the ON timer is set, operation will
start 15 minutes before the actual set
time.
Use the OFF timer to stop air conditioner
operation at the desired time. This can
save electricity while you are going out
or sleeping.
The set timer will repeat daily once it is
set.
If there is a power failure, you can press
the SET button to restore the previous
setting once the power resumes.
If the timer is cancelled, you can restore
the previous setting by pressing SET
button.
TIMER
Press CLOCK button for more than 10 seconds to change the time format - from AM/PM format to 24 hour format.
For your convenience, you can set the air conditioner to operate automatically by using both ON and OFF timer.
Hints
Troubleshooting
TIMER indicator always on.
Timer is activated and the setting will repeat itself daily.
POWER indicator is blinking 15 minutes before ON
timer is activated.
The unit is determining the operation mode by sensing the room
temperature. This happens when it has been set to AUTO operation
mode.
Ensure the clock on the remote control has been set
correctly.
You can set both the ON and OFF timers at the same time.
To cancel either the ON or OFF timer, press or ,
then press .
1
Select ON or
OFF timer.
2
Set the
desired time.
3
Confirm the
setting.
CANCEL
Cancel the
selected timer.