Panasonic CS-E9NKUAW Air Conditioner User Manual


 
7
TO SET THE TIMER
TO SET THE TIMER
To turn ON or OFF the unit at a preset time.
ON
OFF
1
2
S
ET
Select ON or
OFF timer
Set the time Con rm
To cancel ON or OFF timer, press
O
N
or
OFF
then
press
CANCEL
.
When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET
.
7
TO REACH TEMPERATURE
QUICKLY
Single Split System: This operation stops automatically
after 20 minutes.
Multi Split System: Press the button again or turn OFF the
unit to stop this operation.
8
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
9
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F
10
Press and hold for approximately 5 seconds to show
12-hour (am/pm) or 24-hour time indication.
11
Press to restore the remote control’s default setting.
12
Not used in normal operations.
NOTES
NOTES
Q
UIET
,
P
O
WERFUL
Can be activated in all modes and can be cancelled by
pressing the respective button again.
Q
UIET
,
P
O
WERFUL
Cannot be selected at the same time.