Panasonic CS-E28FKR Air Conditioner User Manual


 
ENGLISH
5
AUTO
HEAT
FAN
SPEED
AIR
SWING
COOL
DRY
TEMP
AIR SWING
FAN SPEED
QUIET
POWERFUL
TIMER
ON
123
OFF
SET
CANCEL
MODE
OFF/ON
AC
RC
SET
CLOCK
CHECK
RESET
Hint
A temperature setting 1°C higher
in cooling operation or 2°C lower in
heating operation than the desired
temperature equates to a 10%
power saving.
AUTO, HEAT, COOL, DRY
Supersonic air purifying device operates automatically once
the unit is switched on.
POWERFUL
and
QUIET
operations are available in all modes.
Press
OFF/ON
again to stop the operation.
OFF/ON
Start the
operation.
2
2
MODE
Select the
desired
operation.
1
1
4%-0
Set the
temperature.
(16°C~30°C)
3
3
Troubleshooting
Mist emerges from indoor unit. Condensation effect due to cooling process.
Heating/Cooling operation does not work.
Ensure temperature is set correctly.
Make sure windows and doors are closed.
Make sure lters are cleaned and replaced.
Make sure inlet and outlet vents are cleared.
Water owing sound during operations. Cause by refrigerant ow inside the unit.
The power indicator blinks during the operation and
the indoor fan is stopped.
The unit is in defrost mode, and the melted frost is drained from the
outdoor unit.
Operation Details
COOL - Cooling Operation
Enjoy cool air at your desired
temperature.
DRY - Soft Dry Operation
Keeps your environment
dehumidi ed by running a very
gentle cooling operation.
During soft dry operation, the
indoor fan operates at low fan
speed.
AUTO - Automatic Operation
Unit selects the operation mode
according to temperature setting,
outdoor and room temperature.
The power indicator blinks during
operation.
Operation mode is reselected
every 30 minutes.
In heating mode, it takes a while
for the unit to warm up. The
power indicator blinks during this
operation.
HEAT - Heating Operation