Panasonic CS-E18DKRW Air Conditioner User Manual


 
AUTO
COOL
HEATDRY
Operation Details
D
Auto, Heat, Cool, Dry
2
Select the
desired
operation.
3
Set the
temperature.
(16°C~30°C)
Start the
operation.
1
HOW TO OPERATE
Supersonic air purifying device (super alleru-buster) operates
automatically while the air conditioner is switched on.
Powerful, Quiet and Ion operations could be activated in all
operation modes.
Press
button again to stop the operation.
Troubleshooting
The room has a peculiar odour.
This may be a damp smell emitted by the wall, carpet, furniture or
clothing in the room.
Air conditioner does not cool or heat effi ciently.
Ensure the temperature has been set correctly.
Ensure windows and doors have been closed properly.
Ensure fi lters are cleaned or replaced when necessary.
Ensure inlet and outlet vents of the units have not been obstructed.
To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.
Hint
AUTO - Automatic Operation
Enables you to enjoy the cooling
effect at your preferred setting
temperature.
COOL - Cooling Operation
Enables you to set the desired
temperature at low fan speed which
provides you with the dehumidifying
surroundings.
DRY - Soft Dry Operation
The unit will automatically select
the operation mode according
to the setting, outdoor and room
temperature. During operation mode
selection, power indicator blinks.
For every 30 minutes, the operation
mode is reselected.
Enables you to enjoy the warming
effect at your preferred setting
temperature.
For cold air prevention, air might
not blow out immediately and
power indicator blinks when
operation starts.
Also operates in defrost mode
(maximum 10 minutes) where by
the power indicator blinks. The
melted frost is drained at outdoor
unit and indoor fan is stopped.
HEAT - Heating Operation
55
CS-E15DKRW CU-E15DKR / CS-E18DKRW CU-E18DKR / CS-E21DKRS CU-E21DKR