Panasonic CS-C12PKF-3 Air Conditioner User Manual


 
10
POWER/AVS
TIMER
ECONAVI
AUTO COMFORT
NANOE-G
POWERFUL/QUIET
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Please consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a sharp
object. This can lead to damage and malfunction.
Front panel
Wash gently and dry.
Remove the front panel
POWER/AVS
TIMER
ECONAVI
AUTO COMFORT
NANOE-G
POWERFUL/QUIET
Raise
Pull out
1
2
Close it securely
For CS-C18PKF-3, CS-C24PKF-3:
Press at center of the front panel.
4
POWER/AVS
TIMER
ECONAVI
AUTO COMFORT
NANOE-G
POWERFUL/QUIET
Insert at
both sides
1
Press both ends of
the front panel
3
Close down
2
nanoe-G Generator
Every 6 months
• Clean with dry cotton bud.
• Do not touch during operation.
Air lters
Every 2 weeks
• Wash/rinse the lters gently
with water to avoid damage to
the lter surface.
• Dry the lters thoroughly under shade, away
from re or direct sunlight.
• Replace any damaged lters.
Remove air lter Attach air lter
Insert into the unit
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to
have the following temperature difference
between air inlet and air outlet vents:
COOL: 8 °C
For extended non-use
Activate nanoe-G operation for 2~3 hours as an
alternative to remove moisture left in the internal
parts thoroughly to prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Aluminium nFront panel
Air lters
Indoor unit
Human activity
sensor
nanoe-G
Generator