Filter
Top Products
MAINTENANCE
Replace internal battery every three years or according to ambient temperature guidelines provided by battery unit
manufacturer (sold separately), to ensure proper operation.
NOTE: Servicing of parts should be performed by qualified service personnel. For replacement lamps or batteries,
contact your local representative.
Painting or wallpapering front cover plate:
1. When painting cover plate, be sure to first use a primer coat, prior to final color matching.
2. After each coat of paint, ENSURE FREE MOVEMENT OF THE LENS DOOR by opening and closing it several times
until paint is completely dry. When paint is completely dry, test unit operation using the push to test GREEN led
button. If door sticks, safely trim residual paint from around lens door with utility knife or similar tool and test unit
operation again.
3. When wallpapering the cover plate, be sure to trim around the edges of the lens door to ENSURE FREE
MOVEMENT. After wallpaper is installed, test the unit operation via the push to test GREEN led button.
OPERATION
To test existing unit when fully installed in wall or ceiling, depress and hold GREEN led/ac test switch. Lamp housing
will automatically extend outward and lamps will illuminate. After test, release GREEN led/ac switch to return
housing to original position.
This SC Series Emergency Light is furnished with a sophisticated low voltage battery dropout circuit to protect the
battery from over discharge after the useful output has been reached. Allow 24 hour recharge time after installation
or power failure for full load testing.
Imported by:
OSRAM SYLVANIA Inc.
54 Cherry Hill
Danvers, MA 01923
Made in China
SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc.
Copyright © 2011 OSRAM SYLVANIA Inc. 04/20
E13878
DQ3-144-006A
NOTICE
NOTICE
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-LIGHTBULB (1-800-544-4828)