Oregon Scientific WS908 Air Cleaner User Manual


 
EN
6
SPECIFICATIONS
TYPE
Weight
MAIN UNIT
L x W x H
DESCRIPTION
145mm(L) x 66.9mm(W) x
77.9mm(H)
185g (6.53oz)
5V DC power adaptor: INPUT
AC 110-240V 50 / 60Hz
5V DC in-car power adaptor:
Input DC12V/24V
Power
TROUBLESHOOTING
This chapter summarizes the most common problems
you may encounter when using the unit. If you are
unable to solve the problem with the information
below, contact the Consumer Care Centre in your
country.
Problem
The unit doesn’t
work.
The clean air doesn’t
come out smoothly
from the air outlet
The odors are not
removed properly.
Solution
There may be a connection
problem. Check if the plug
is inserted to the wall socket
properly.

yet or not inserted properly.

the inlet and outlet covers.
Perhaps you have not
removed the plastic wrapper

the plastic wrapper and switch
on the unit again.
Perhaps the ambient air
quality of the room is very
poor. In that case, open the
windows to improve the air
circulation.
The nano filter may be too
dirty or may have reached
the end of its life. You
should clean the nano filter
from the unit and clean it with a vaccum cleaner.


It is not necessary to remove the air inlet stand of
the unit from the dashboard for cleaning.