Filter
Top Products
EN
5
compartment.
6. Press RESET with the point of a blunt object
(such as a ball point pen).
7. Replace the battery compartment lid. Secure.
8. Mount the remote unit on a flat surface using
the recess holes on the back of the mounting
unit. Insert the sensor into the mounting unit,and
gently push down to secure. For best results:
• Place the unit out of
direct sunlight and
moisture.
• Do not place the remote
unit more than 20 – 30 meters (60 – 90 feet)
from the main (indoor) unit.
• Position the unit so that it faces the main
(indoor) unit. Minimize obstructions such as
doors, walls, and furniture.
You may need to experiment with various
locations to get the best reception.
9. Once the batteries are in place, the sensor will
transmit signals every 40 seconds.The readings
shown on the main unit depend on which remote