Oreck XLPRO6Z Vacuum Cleaner User Manual


 
ALL OTHER SERVICING SHOULD BE DONE BY AN
ORECK AUTHORIZED SERVICE CENTER.
Troubleshooting Guide
CAUTION: Always disconnect power cord before servicing
vacuum.
WARNING: Repairs should only be performed by an
authorized service center.
Whenever calling, please be sure to have your model and serial
number from data plate.
CALL CUSTOMER SERVICE HOT LINE
COMMERCIAL:1-800-336-0433
HOSPITALITY: 1-888-23-ORECK
CANADA: 1-888-67-ORECK
Problem: Loss of Vacuum
Cause:
1. Damaged lid.
2. Full paper filter bag.
3. Clogged hose or wand.
Problem: Dust blowing from
vacuum when running.
Cause:
1. Full paper filter bag.
2. Improperly installed paper
filter bag.
3. Cloth filter bag dirty.
Solution:
1. Inspect and replace if needed.
2. Replace paper filter bag.
3. Remove obstruction.
Solution:
1. Replace filter bag.
2. Reinstall or replace paper filter
bag.
3. Clean cloth filter bag.
Parts Diagram
XLPRO6A & XLPRO6Z Parts Listing
Item # Part # Description
1 10-0001-6-O 6 Qt Body
2 10-0002-6-O 6 Qt Lid
6 PK25PRO6DW 6 Qt Paper Bag, 25 Pk
7 10-0496 6 Qt Cloth Bag
8 10-0008-A Complete Dome Filter
12 10-0012 Motor
14 10-0014 Screws, Motor
15 10-0015 Washers, Motor
16 10-0016 Motor Deflector Plate
17 10-0017
Screw, Motor Deflector
18 10-0018 Sound Filter Band
19
10-0019 Dual Cell Noise Filter
20 10-0020 Cushioned Back Pad
21
10-0021
Waist Belt (Not Shown)
22 10-0022 Screw, Waist Belt
23 10-0023 Washer, Waist Belt
25
10-0025
On/Of
f Switch
26 10-0026-A Power Cord, 17”
28 COMMCORD 50’ Electrical Cord
38 10-0069 Cushion Support Clamp
39 10-0070 Screw (Cord Lock)
40
10-1333
Set, Motor Brushes
Accessories
Item #
Part #
Description
29
10-0030-A 2 Pc Aluminum Wand
31
10-0031
5” Upholstery Tool
32 10-0032 14” Scalloped Floor Tool
33
10-0033
17” Crevice
T
ool
36 10-0036 Stretch Hose w/Cuffs
37
10-0037 3” Dust Brush
41
10-0183-A
Floor Replace Brush
42 10-0183 Bristle, Floor Tool
XLPRO10A Parts Listing
Item # Part # Description
1 10-0001-O 10 Qt Body
2 10-0002-O 10 Qt Lid, Complete
3 10-0003 Lid Latch
4 10-0004 Lid Rivet
6 PK25PRO10DW 10 Qt Paper Bag, 25 Pk
7 10-0007-A 10 Qt Cloth Bag
8 10-0008-A Complete Dome Filter
12 10-0012 Motor
14 10-0014 Screws, Motor
15 10-0015 Washers, Motor
16 10-0016 Motor Deflector Plate
17
10-0017
Screw
, Motor Deflector
18
10-0018
Sound Filter Band
19 10-0019 Dual Cell Noise Filter
20 10-0020 Cushioned Back Pad
21 10-0021 Waist Belt (Not Shown)
22 10-0022 Screw, Waist Belt
23
10-0023
W
asher
, W
aist Belt
25 10-0025 On/Off Switch
26 10-0026-A Power Cord, 17”
28
COMMCORD
50’ Electrical Cord
38 10-0069 Cushion Support Clamp
3910-0070 Screw (Cord Lock)
40 10-1333 Set, Motor Brushes
Accessories
Item # Part # Description
29 10-0030-A 2 Pc Aluminum Wand
31
10-0031
5” Upholstery Tool
32 10-0032 14” Scalloped Floor Tool
33
10-0033
17” Crevice
T
ool
36 10-0036 Stretch Hose w/Cuffs
37 10-0037 3” Dust Brush
41
10-0183-A
Floor Replace Brush
42 10-0183 Bristle, Floor Tool
(Sold Separately)
(29)
(33)
(36)
(32)
(31)
(37)
©2005 Oreck Holdings, LLC. All Rights Reserved. All word mark, logos, product configurations, and registered trademarks are
owned and used under the authority of Oreck Holdings, LLC.
42462 REV H 12/05
ECN-8214