Filter
Top Products
5
Operation
.
1
2
3
4
SR1500 & BR1000 MODELS
To operate the SR1500 and the BR1000 simply plug the unit in, set the
thermostat (located on the rear of the unit) to the desired comfort zone, then
depress the switch on the front of the unit. In about a minute the internal fan
will come on delivering hot air into the room.
SF1500 MODELS
To operate the SF1500 simply plug the unit in, set the thermostat (located on
the rear of the unit) to the desired comfort zone, set the OPTI-SWITCH
™
on
the rear of the unit to HIGH or LOW then depress the switch on the front of
the unit. In about a minute the internal fan will come on delivering hot air
into the room.
PERFORMANCE RECOMMENDATIONS
To assure the best performance of the heater, the following are suggested:
` For maximum efficiency, locate the heater on an inside wall exhausting
towards an outside wall.
The heater is not recommended for areas with exposed, un-insulated
concrete or metal walls.
The heater works most efficiently when relative humidity is higher. Turn on
humidification options you may have.
Lower your thermostat to 65 - 70 degrees for best performance and energy savings.
ENGLISH