6
Part Number
HEPA filter, 3 pack AIRHEPA3PK
Problem Check Solution
Unit does not
turn ON
• Power Cord
• Selector Switch
• Plug in Power Cord
• Set Selector Switch for desired blower
speed.
Unit has high
noise level.
Check for dirty
HEPA Filter
• Replace HEPA filter if desired.
Unit still does
not operate
properly.
Check all the
above points.
Contact Oreck for service.
Trouble-
shooting
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.