Oreck ProShield Air Purifier Air Cleaner User Manual


  Open as PDF
of 18
 
11
Problem Check Solution
Unit does not
turn ON
•PowerCord
•SelectorSwitch
•TopCover
• PluginPowerCord
• SetSelectorSwitchfordesiredblower
speed.
• Makesurethetopcoverissecurelyclosed
Truman Cell
light has turned
solid red.
Truman Cell •Asolidredlightisa30daycleaning
reminder. Wash Collector Cell. Make sure
it is thoroughly clean and dry before
reinstalling.
Truman cell
light is
blinking red
Truman Cell •Ablinkingredindicatesthepowersupply
has shut down due to arcing or short
circuit. The cell should be inspected and
cleaned, repaired, or replaced.
Unit does
not remove
pollutants.
Truman Cell •CleantheTrumanCellandmakesureitis
completely dry before reinstalling.
•Trumancellmaybedamaged.Contact
Oreck for service.
Unit sparks,
crackles and
pops.
Truman Cell • Sparkingorpoppingnoise(arcing)can
occur when a large particle is captured
in the Truman Cell. If the unit is arcing
excessively, the cell may be dirty. Try
cleaning the Truman Cell.
• Ifexcessivearcingcontinuesafter
proper cleaning, the Truman Cell may
be damaged or wet. If damaged, contact
Oreck for service.
Trouble-
shooting
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.
 previous next