Oreck AIR94 Air Cleaner User Manual


 
5
Operate
1. Check the air purier for the lters.
Be sure the supplied lters are properly
in place and all plastic is removed
before turning the unit on.
2. Place the air purier on a hard
surface such as the oor, a table
or desk. Be sure the grilles
are not blocked by other
objects, and there are no
candles or ames near the unit.
The air purier can be placed in a
horizontal or vertical position.
3. Plug in into nearest standard
electrical outlet that accepts a polarized plug.
4. Lightly Press the power button to turn the air purier on.
Press the power button again to turn the air purier off.
5. Select the fan speed. To select the speed, lightly press
and release the fan speed button until the desired speed is
reached.
L = low, Silence Technology
®
, M = medium or H = high.
6. Adjust the timer feature. The time can be selected from
two, four or eight hours. The unit will turn off once it runs
for the selected hours.
Note: The unit will run continuously if all the timer lights
are off.
7. The Check Filter Lights will light up when the lters may
need to be replaced. Press and hold the button for several
seconds until the lter indicator shuts off.
8. Choose to turn the Air Revitalizer feature on or off. Due to
the sensitivity of the smart panel, a slight delay may occur
for the electronics to respond.
IMPORTANT: This unit is equipped with a smart panel that
senses your touch. Heavy pushing is not recommended.
3
4
2
5
8
67
horizontal position
vertical
position