Filter
Top Products
6
Troubleshooting Guide
How to Remove the Power Supply Cover
1. Insert flathead screwdriver into slot on the interior edge of the power supply cover, and
push plastic clip away from contact wall so that the cover can be lifted up.
2. The switch wires will limit the movement of the power supply cover.
3. Is the switch actuator broken?
4. Is the switch properly seated in the bracket, or is the bracket broken or distorted?
The switch is held in position by a bracket that allows the switch to be snapped
between two locator ribs on the bracket.
5. Are the wires connected to the switch?
If the actuator is broken,
replace the switch.
If the switch is out of
position, straighten and
secure it. If the bracket is
broken or distorted, replace
the motor bracket.
Check both wires on the
interlock switch to ensure
that they are connected and
tight.
Gently pry the plastic clip
away from contact wall to
release the cover.