Oreck 1600 Vacuum Cleaner User Manual


 
11
Use
After Using the Vacuum
7. Slide the power switch to the OFF position.
8. Unplug the power cord.
9. Wrap the cord around the cord wrap area and store.
Note: The Ultimate Handheld Vacuum has a MOTOR
PROTECTION SYSTEM: If fine materials such as soot,
cement, plaster dust, copy machine powder, etc. are picked up,
the bag surface may seal and cause the motor to shut off to
avoid overheating. If this happens, turn the switch off and
unplug the cleaner. If full, replace disposable inner bag. Check
andclearanyclogsinhoseoraccessories.Afterapproximately
thirty minutes the motor will have cooled and the cleaner will
be ready to use.
IMPORTANT: The cleaner must remain unplugged for thirty
minutes for motor to cool and system to reset.
Using the Vacuum
1. Unwrap the cord around the bottom of the cord wrap area.
2. Plug the cord into the electrical socket.
3. Attach the tool you need for your cleaning job to the end of
theextensionwand.
4.Pressthebuttonontheextensionwandformorelength
if needed.
5. Slide the power switch to the ON position.
6. Begin vacuuming.
1
2
3
5
4