Filter
Top Products
English
Shelf Assembly
A. Loosely thread two Shelf Screws through each Shelf Bracket and into two Shelf
T-Bars.
A.
B. Slide both Shelf Bracket Assemblies
into the Mounting Post. Then slide them
into the desired position, and, using the
supplied Hex Wrench, tighten both Shelf
Bracket Assemblies. (The Shelf T-Bars
will turn to the right once they are inside the
Mounting Post and you begin tightening
the Screws. When they tighten, they will
grab the inside rails of the Mounting Post
Channel.)
NOTE: Ensure that the Shelf
Bracket is installed with the
notched hole on top and facing
the outside.
B.
C. Insert a Shelf Screw into each of the Shelf’s top screw holes.
C.
D. Установите полку на кронштейн.
D.
E. Затяните верхние винты, затем
вставьте и затяните еще один винт в
нижнее отверстие.
E.
F.
F. Отрегулируйте положение полки с помощью уровня.