Filter
Top Products
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
1
GENERAL DESCRIPTION
The OMEGAFLEX@ FPUSV4000 variable speed drives are powered by
a DC gearmotor. A specially designed electronic speed control system
converts AC to DC while providing smooth accelerated control over the
entire flow range. The three position on/ off switch allows the user to
maintain speed setting when unit is turned off or reversed. The
FPU4500 are fixed speed AC units.
FEATURES
*1. Electrical: I 15 VAC, 60HZ
2. Reversible Variable Speed Control for Variable Flowrates.
3. Maximum and Minimum Speed Control Adjustment.
*4. Factory Preset Flowrate: 2000 ml/min.
S. Replaceable Motor Brushes. (Replacement instructions page 5.)
6. External Fuse Holder. (Fuse replacement instructions page 5.)
INSTALLATION INSTRUCTIONS
1. POWER REQUIREMENTS: Voltage and frequency of power supply
must be the same as shown on unit.
2. WIRING CONNECTIONS: All wiring and electrical connections
must comply with local and national electrical codes.
3. MOUNTING: FPU4500 Case enclosed model may be placed on any
flat surface assuring space is provided at the back of the case for air
circulation through ventilation holes. FPU4500 Bracket or Case
mount assuring space provided for air flow. Do not allow tubing to
be crimped.
4. MOUNTING LOCATION: Pump should be placed in a dry location
with adequate cooling provided. The ambient temperature should
not exceed 35°C.
This unit should not be used in outdoor or hazardous
locations
Motor life will be drastically reduced if left in the stalled
position for extended periods.
CAUTION
WARNING