Niles Audio DBI-2 Door User Manual


  Open as PDF
of 20
 
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373
9
INSTALLATION
MOUNTING ThE DBI-2
Once you have decided on the location for the DBI-2 (generally near the location of the Niles
MultiZoneControlSystem),makesurethatthe12VDCpoweradapterandallcablesare
disconnected before mounting.
The DBI-2 can be either mounted on the back of a cabinet or on a wall using screws (not included).
Also, it can be placed on a shelf using the included adhesive rubber feet (see Figure 1 on page 7).
CONNECTING ThE DBI-2
1. Connect the Audio Output of the DBI-2 to the Paging Input of a compatible Niles MultiZone
System (see Figure 2onpage10).
2. (Optional) Connect the Audio Output of a paging system to the Audio Input of the DBI-2
(see Figure 2onpage10).
3. Connect standard or illuminated doorbell buttons to the Contact Closure connections
(see Figure 2onPage10).
4. For homes with existing doorbell chimes that will be retained, connect the existing wiring to the
3-30VTrigger(seeFigure 3 on page 11)
5.(Optional)Connectthe12VDCVoltageTriggerOutputtoavoltageactivateddevice.
(see Figure 2onpage10).
6.Connecttheincluded12VDCin-linepoweradapter’svoltageoutputplugintotheDBI-2’spower
jack and then plug its AC power cord into an unswitched AC outlet (see Figure 1 on page 7). The
red LED power indicator will illuminate to confirm proper power connection.

 previous next