Nighthawk KN-COP-DP Carbon Monoxide Alarm User Manual


 
1-1 1-2
Part One – Your Nighthawk CO AlarmPart One – Your Nighthawk CO Alarm
About Your CO Alarm
The number one feature that sets Nighthawk apart from other
alarms is its unique digital display that gives you a continuous read-
out of CO levels from 30-999 parts per million. The digital
display serves as an early warning of CO presence. Additionally, the
digital display gives you added time to find the source of the CO
and correct the problem, limiting the risk of unrecognized long term
exposure. Of course, the loud 85 decibel alarm warns of higher lev-
els, even while you’re sleeping.
While many other CO alarms require costly sensor or battery pack
replacement, there are no replacement parts on Nighthawk CO
alarms. And Nighthawk is the only CO alarm that gives you the
choice of a direct-plug, a 6' power cord or a hardwire unit.
Depending on how or where you wish to mount your alarm, you
can get exactly what you need for a perfect application. These are
just a few reasons over 4.5 million families have chosen Nighthawk
over every other brand for this kind of life-saving protection.
Nighthawk CO Alarm – front view
PPM of CO
CARBON
MONOXIDE
ALARM
TEST-
RESET
PEAK
LEVEL
Move to Fresh Air
Vents
Sounder
Alarm
Digital
Display
Vents
Test/Reset
Button
Blinking
Red Dot
Peak Level
Button
Nighthawk CO Alarm– rear view
Keyholes
Power cord unit
(KN-COP-C)
Hardwire unit
(KN-COP-HW)
Direct plug unit
(KN-COP-DP)
Standard Plug
Approx. 8 ft.
(provided)
90˚ Rotating
Direct Plug
Mounting Plate
(provided)
Mounting
Screws
(provided)
Wire Nuts
(provided)
810-1009 AC Digital 11/13/01 11:22 AM Page 8