Filter
Top Products
12
¾ To connect with devices using WPS:
1. Press the Power or Navigation button to
awaken the LCD screen.
2. Press the Navigation button until WPS setup
screen displays.
3. To activate WPS, press the Power button.
4. Within two minutes, press the WPS button on
the device that you want to connect to your WiFi
network.
The mobile hotspot and the wireless device
automatically communicate and establish a
connection.
Monitor Data Usage
You can monitor data usage using either the LCD
screen or the web page. Visit the mobile hotspot web
page to configure your monthly data usage.
¾ To view data usage on the LCD screen:
Awaken the LCD screen by pressing either the
Power or the Navigation buttons.
¾ To configure your monthly data usage:
1. Launch an Internet browser from a computer or
wireless device that is connected to the network.
2. Enter http://netgear.aircard.