Filter
Top Products
8
W415-0275 / C / 09.23.05
The upper louvres must be
removed to allow the door
to be opened or closed. To
access the lower door
latch, open the valve con-
trol door. Release the top
and bottom door latches, lo-
cated at the right side of the
door.
UPPER LOUVRES: Insert the
upper louvres into the slots
on both brackets. Press the
top flange of the hood into the
four clips located along the
top of the unit as shown.
LOWER LOUVRES: Attach
each hinge to the firebox with
2 screws. door and optional
louvre.
HINGE SCREEN:Position the hinge screen into place and
with the control door open, secure to the firebox using three
screws.
DOOR LATCH
UPPER LOUVRE
FLANGE
CLIP
FIGURE 13
LOWER LOUVRES
(VALVE CONTROL DOOR)
LOUVRE
HOOD
SLOT
BRACKET
FINISHING
DOOR OPENING & CLOSING
GVFL LOUVRE INSTALLATION
FIGURE 14
FIGURE 15
FIGURE 16
FIGURE 17
A
C
B
HOOD
Attach the hood by pressing the
top flange into the clips along
the top of the louvre opening.
Secure using a screw through
the centre slot.
A
CLIPS
CENTRE
SLOT
FLANGE
UPPER LOUVRES
Insert the louvre tabs into the
slots located at the top left and
right corners of the unit.
SLOT
TAB
B
LOWER LOUVRES
Insert the hinge clips into the
slots located at the bottom left
and right corners of the unit.
To remove the louvres, pull the
back tabs of the clips forward,
while pushing the louvre assem-
bly back. Lift the clip.
C
HINGE
CLIP
SLOT
L36 LOUVRE INSTALLATION